Tiêu chuẩn quốc tế

Số hiệu

Standard Number

ANSI/OPEI B175.3:2013
Năm ban hành 2013

Publication date

Tình trạng W - Hết hiệu lực

Status
Tên tiếng việt

Title in Vietnamese

Outdoor Power Equipment – Internal Combustion Engine–Powered Hand-Held Grass Trimmers and Brushcutters – Safety and Environmental Requirements
Tên tiếng anh

Title in English

Outdoor Power Equipment – Internal Combustion Engine–Powered Hand-Held Grass Trimmers and Brushcutters – Safety and Environmental Requirements
Thay thế cho

Replace

ANSI B175.3:2003
Thay thế bằng

Replaced by

ANSI/OPEI B175.3:2019
Lịch sử soát xét

History of version
Số trang

Page

49
Giá: 196,000 VNĐ

Price
Phạm vi áp dụng

Scope of standard

The requirements of this Standard apply to:

a) Internal combustion engine-powered, hand-held, grass trimmers
intended for use with flexible nonmetallic line, or other types of
nonmetallic cutting attachments, and

b) Internal combustion engine-powered, hand-held, brushcutters
intended for use with cutting blades and other cutting
attachments.

NOTE - If a grass trimmer is marketed by the manufacturer as
convertible to a brushcutter, then the converted unit shall comply
with requirements for brushcutters and vice-versa.

A convertible unit may be marketed as a grass trimmer or a
brushcutter without including the devices required for conversion
in the packaging, provided the operator manual clearly addresses
the need to acquire and use the required conversion devices and the
manufacturer makes such devices available as optional equipment.
Trimmers and brushcutters with back mounted power units are not
covered by this standard.

This standard is not applicable to machines equipped with
metallic cutting attachments consisting of more than one piece,
e.g., pivoting chains or flail blades.

The requirements of this standard do not cover cutting
attachments not approved for use by the equipment manufacturer.
However, the applicable test procedures, related to cutting
attachments, contained within this standard may be used by a
component manufacturer of after-market cutting attachments to
qualify their cutting attachments for use on grass trimmers or
brushcutters manufactured by entities other than the component
manufacturer. Should the manufacturer of after-market cutting
attachments choose to comply with this standard, such manufacturer
shall conduct the tests relating to the cutting attachments on the
units they recommend them for and keep records related to the test
results.

NOTE - English conversions are shown in brackets and are
included for information only.

The effective implementation date of this standard shall be two
(2) years after the publication date and shall apply to all
products built after that date. Manufacturers may also comply with
this standard any time after the publication date.

"ANSI/OPEI B175.3-2013" and "ANSI B175.3-2013" may be used
interchangeably wherever referenced in this standard.

Purpose

The purpose of this standard is to establish safety and
environmental requirements for internal combustion engine-powered,
hand-held, grass trimmers and brushcutters.
Đặt mua tiêu chuẩn