Tiêu chuẩn quốc tế
|
Số hiệu
Standard Number
ASTM A336/A336M-09
Năm ban hành 2009
Publication date
Tình trạng
W - Hết hiệu lực
Status |
|
Tên tiếng Anh
Title in English Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
|
|
Chỉ số phân loại Quốc tế (ICS)
By field |
|
Số trang
Page 8
Giá:
Price Liên hệ / Contact us
|
|
Phạm vi áp dụng
Scope of standard 1.1 This specification covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associated equipment. 1.2 Forgings made of steel grades listed in Specification A 335/A 335M, may also be ordered under this specification. The chemical, tensile, heat treatment, and marking requirements of Specification A 335/A 335M shall apply, except the forging shall conform to the chemical requirements of Tables 1 and 2 of Specification A 335/A 335M only with respect to heat analysis. On product analysis they may deviate from these limits to the extent permitted in Table 1 of this specification. 1.3 Supplementary Requirements S1 to S9 are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.4 Unless the order specifies the applicable "M" specification designation, the material shall be furnished to the inch-pound units. 1.5 Specification A 336/A 336M formerly included austenitic steel forgings, which are now found in Specification A 965/A 965M. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. TABLE 1 Tensile Requirements Ferritic SteelsGradeF1F11, Class 2F11, Class 3F11, Class 1F12F5F5AF9F6F6NMF21, Class 3F21, Class 1F22, Class 3F22, Class 1F91F911F3VF3VCbF22VTensile strength, ksi [MPA]70- 95 [485- 660]70- 95 [485- 660]75- 100 [515- 690]60- 85 [415- 585]70- 95 [485- 660]60- 85 [415- 585]80- 105 [550- 725]85- 110 [585- 760]85- 110 [585- 760]115- 140 [790- 965]75- 100 [515- 690]60- 85 [415- 585]75- 100 [515- 690]60- 85 [415- 585]85- 110 [585- 760]90- 120 [620- 830]85- 110 [585- 760]85- 110 [585- 760]85- 110 [585- 760]Yield strength, min, ksi [MPa]40 [275]40 [275]45 [310]30 [205]40 [275]36 [250]50 [345]55 [380]55 [380]90 [620]45 [310]30 [205]45 [310]30 [205]60 [415]64 [440]60 [415]60 [415]60 [415]Elongation in 2 in. or 50 mm, min, %20201820202019201815192019202020181818Reduction of area, min, %40404045404035403545404540454040454545
|