Tiêu chuẩn quốc tế

Số hiệu

Standard Number

ASTM E155-05
Năm ban hành 2005

Publication date

Tình trạng W - Hết hiệu lực

Status

Tên tiếng Anh

Title in English

Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
Số trang

Page

4
Giá:

Price

Liên hệ / Contact us
Phạm vi áp dụng

Scope of standard

1.1 These reference radiographs illustrate the types and degrees of discontinuities that may be found in
aluminum-alloy and magnesium-alloy castings. The castings illustrated are in thicknesses of 1/4 in. [6.35 mm] and
3/4 in. [19.1 mm]. The reference radiograph films are an adjunct to this document and must be purchased separately
from ASTM International if needed.1.2 These film reference radiographs are not intended to illustrate the
types and degrees of discontinuities found in aluminum-alloy castings when performing digital radiography. If
performing digital radiography of aluminum-alloy castings, refer to Digital Refererence Image Standard E 2422.
Magnesium-alloy digital reference images are not currently available from ASTM International.1.3 This
document may be used where no other applicable document exists, for other material thicknesses for which it has
been found to be applicable and for which agreement has been reached between the purchaser and the
manufacturer.1.4 The values stated in inch-pound units are to be regarded as the standard.1.5
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety and health practices and determine the
applicability of regulatory limitations prior to use.Note 1 - Vol I:The set of reference radiographs
consists of 13 plates covering discontinuities in aluminum-alloy castings and 10 plates covering discontinuities
in magnesium-alloy castings. Each plate is held in an 81/2 by 11-in. [216 by 279-mm] cardboard frame and each
plate illustrates eight grades of severity for the discontinuity in approximately a 2 by 2-in. [51 by 51-mm] area.
The cardboard frames are contained in a 101/2 by 111/2-in. [267 by 292-mm] ring binder.Vol. II: The set of
reference radiographs consists of four plates covering discontinuities in magnesium-alloy castings only. Each
plate is held in an 81/2 by 11-in. [216 by 279-mm] cardboard frame and illustrates eight grades of severity for
the discontinuity (with the exception of discrete discontinuities, where only one example of each discontinuity is
given).Note 2 - Reference radiographs applicable to aluminum and magnesium die castings up to 1 in. [25 mm]
in thickness are contained in Reference Radiographs E 505.