Tra cứu Tiêu chuẩn quốc tế
Tìm thấy 73948 kết quả.
Searching result
| 41621 |
DIN CEN/TS 14418*DIN SPEC 60018Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers; German version CEN/TS 14418:2014 Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers; German version CEN/TS 14418:2014 |
| 41622 |
DIN CEN/TS 14464*DIN SPEC 1161Sawn timber - Method for assessment of case-hardening; German version CEN/TS 14464:2010 Sawn timber - Method for assessment of case-hardening; German version CEN/TS 14464:2010 |
| 41623 |
DIN CEN/TS 1451-2*DIN SPEC 91195Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1451-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1451-2:2012 |
| 41624 |
DIN CEN/TS 1452-7*DIN SPEC 19675Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 1452-7:2014 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 1452-7:2014 |
| 41625 |
DIN CEN/TS 1453-2*DIN SPEC 19942Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1453-2:2017 |
| 41626 |
DIN CEN/TS 14541*DIN SPEC 16498Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2013 |
| 41627 |
DIN CEN/TS 1455-2*DIN SPEC 19579Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1455-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1455-2:2012 |
| 41628 |
DIN CEN/TS 14578*DIN SPEC 19547Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version CEN/TS 14578:2013 Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version CEN/TS 14578:2013 |
| 41629 |
DIN CEN/TS 1459-8*DIN SPEC 3425Rough-terrain trucks - Safety requirements and verification - Part 8: Variable-reach tractors; German version CEN/TS 1459-8:2018 Rough-terrain trucks - Safety requirements and verification - Part 8: Variable-reach tractors; German version CEN/TS 1459-8:2018 |
| 41630 |
DIN CEN/TS 14632*DIN SPEC 19939Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity; German version CEN/TS 14632:2012 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity; German version CEN/TS 14632:2012 |
| 41631 |
DIN CEN/TS 14758-2*DIN SPEC 19647Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 14758-2:2016 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 14758-2:2016 |
| 41632 |
DIN CEN/TS 14807*DIN SPEC 19548Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2013 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2013 |
| 41633 |
DIN CEN/TS 14972*DIN SPEC 91216Fixed firefighting systems - Watermist systems - Design and installation; German version CEN/TS 14972:2011 Fixed firefighting systems - Watermist systems - Design and installation; German version CEN/TS 14972:2011 |
| 41634 |
DIN CEN/TS 14999*DIN SPEC 16499Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container; German version CEN/TS 14999:2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container; German version CEN/TS 14999:2013 |
| 41635 |
DIN CEN/TS 15022-2*DIN SPEC 1166Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method; German version CEN/TS 15022-2:2009 Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method; German version CEN/TS 15022-2:2009 |
| 41636 |
DIN CEN/TS 15119-1*DIN SPEC 68006Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method; German version CEN/TS 15119-1:2018 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method; German version CEN/TS 15119-1:2018 |
| 41637 |
DIN CEN/TS 15119-2*DIN SPEC 68002Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method; German version CEN/TS 15119-2:2012 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method; German version CEN/TS 15119-2:2012 |
| 41638 |
DIN CEN/TS 15121-1*DIN SPEC 91198Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations; English version CEN/TS 15121-1:2011 Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations; English version CEN/TS 15121-1:2011 |
| 41639 |
DIN CEN/TS 15121-2*DIN SPEC 91197Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - ECPM Service; English version CEN/TS 15121-2:2011 Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - ECPM Service; English version CEN/TS 15121-2:2011 |
| 41640 |
DIN CEN/TS 1519-2*DIN SPEC 91196Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1519-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1519-2:2012 |
