Danh mục tiêu chuẩn Quốc tế ASTM công bố trong tháng 10 năm 2018

Đăng ngày: 10:44 15-10-2018

ASTM Quốc tế, tên giao dịch tiếng Anh là ASTM International, là một tổ chức tiêu chuẩn quốc tế thực hiện phát triển và xuất bản các tiêu chuẩn kỹ thuật đồng thuận tự nguyện cho loạt các vật liệu, sản phẩm, hệ thống và dịch vụ

Danh mục tiêu chuẩn IEC ban hành tháng 10


New Approved ASTM Standards

B1 - Standard Specification for Hard-Drawn Copper Wire has been reapproved, available as B1-13(2018) developed by Committee B01.04, ASTM BOS Volume 02.03.


B2 - Standard Specification for Medium-Hard-Drawn Copper Wire has been reapproved, available as B2-13(2018) developed by Committee B01.04, ASTM BOS Volume 02.03.


B3 - Standard Specification for Soft or Annealed Copper Wire has been reapproved, available as B3-13(2018) developed by Committee B01.04, ASTM BOS Volume 02.03.


B416 - Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors has been reapproved, available as B416-98(2018) developed by Committee B01.06, ASTM BOS Volume 02.03.


B652/B652M - Standard Specification for Niobium-Hafnium Alloy Ingots has been reapproved, available as B652/B652M-10(2018) developed by Committee B10.03, ASTM BOS Volume 02.04.


B654/B654M - Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate has been reapproved, available as B654/B654M-10(2018) developed by Committee B10.03, ASTM BOS Volume 02.04.


B655/B655M - Standard Specification for Niobium-Hafnium Alloy Bar and Wire has been reapproved, available as B655/B655M-10(2018) developed by Committee B10.03, ASTM BOS Volume 02.04.


B738 - Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors has been reapproved, available as B738-13(2018) developed by Committee B01.04, ASTM BOS Volume 02.03.


B869 - Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire has been reapproved, available as B869-07(2018) developed by Committee B01.06, ASTM BOS Volume 02.03.


B882 - Standard Specification for Pre-Patinated Copper for Architectural Applications has been reapproved, available as B882-10(2018) developed by Committee B05.01, ASTM BOS Volume 02.01.


B902/B902M - Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction has been reapproved, available as B902/B902M-13(2018) developed by Committee B01.04, ASTM BOS Volume 02.03.


B910/B910M - Standard Specification for Annealed Copper-Clad Steel Wire has been reapproved, available as B910/B910M-07(2018) developed by Committee B01.06, ASTM BOS Volume 02.03.


B965 - Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderabilityhas been reapproved, available as B965-09(2018) developed by Committee B01.04, ASTM BOS Volume 02.03.


C1023 - Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards has been reapproved, available as C1023-10(2018) developed by Committee C21.03, ASTM BOS Volume 15.02.


C11 - Standard Terminology Relating to Gypsum and Related Building Materials and Systems has been revised to C11-18a developed by Committee C11.91, ASTM BOS Volume 04.01.


C1190 - Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick has been revised to C1190-18 developed by Committee C08.92, ASTM BOS Volume 15.01.


C1330 - Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants has been revised to C1330-18 developed by Committee C24.10, ASTM BOS Volume 04.07.


C1381/C1381M - Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts has been reapproved, available as C1381/C1381M-97(2018) developed by Committee C11.01, ASTM BOS Volume 04.01.


C155 - Standard Classification of Insulating Firebrickhas been reapproved, available as C155-97(2018) developed by Committee C08.92, ASTM BOS Volume 15.01.


C1606 - Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware has been reapproved, available as C1606-10(2018) developed by Committee C21.03, ASTM BOS Volume 15.02.


C1617 - Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals has been revised to C1617-18a developed by Committee C16.31, ASTMBOS Volume 04.06.


C1764 - Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications has been reapproved, available as C1764-12(2018) developed by Committee C11.02, ASTM BOS Volume 04.01.


C1765 - Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe has been revised to C1765-18 developed by Committee C13.02, ASTM BOS Volume 04.05.


C1789 - Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels has been reapproved, available as C1789-14(2018) developed by Committee C11.01, ASTM BOS Volume 04.01.


C181 - Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics has been reapproved, available as C181-11(2018) developed by Committee C08.09, ASTM BOS Volume 15.01.


C1818 - Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe has been revised to C1818-18 developed by Committee C13.02, ASTM BOS Volume 04.05.


C1859 - Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall Applications has been revised to C1859-18 developed by Committee C16.30, ASTM BOS Volume 04.06.


C191 - Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle has been revised to C191-18a developed by Committee C01.30, ASTM BOS Volume 04.01.


C204 - Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus has been revised to C204-18 developed by Committee C01.25, ASTM BOS Volume 04.01.


C401 - Standard Classification of Alumina and Alumina-Silicate Castable Refractories has been reapproved, available as C401-12(2018) developed by Committee C08.92, ASTM BOS Volume 15.01.


C416 - Standard Classification of Silica Refractory Brick has been reapproved, available as C416-97(2018) developed by Committee C08.92, ASTM BOS Volume 15.01.


C455 - Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick has been reapproved, available as C455-07(2018) developed by Committee C08.92, ASTM BOS Volume 15.01.


C467 - Standard Classification of Mullite Refractorieshas been reapproved, available as C467-14(2018) developed by Committee C08.92, ASTM BOS Volume 15.01.


C506 - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe has been revised to C506-18 developed by Committee C13.02, ASTM BOS Volume 04.05.


C506M - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C506M-18 developed by Committee C13.02, ASTM BOS Volume 04.05.


C507 - Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe has been revised to C507-18a developed by Committee C13.02, ASTM BOS Volume 04.05.


C507M - Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C507M-18 developed by Committee C13.02, ASTM BOS Volume 04.05.


C545 - Standard Classification of Zircon Refractorieshas been reapproved, available as C545-97(2018) developed by Committee C08.92, ASTM BOS Volume 15.01.


C621 - Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass has been reapproved, available as C621-09(2018) developed by Committee C08.10, ASTM BOS Volume 15.01.


C655 - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe has been revised to C655-18 developed by Committee C13.02, ASTM BOS Volume 04.05.


C655M - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C655M-18 developed by Committee C13.02, ASTM BOS Volume 04.05.


C673 - Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes has been reapproved, available as C673-97(2018) developed by Committee C08.92, ASTM BOS Volume 15.01.


C71 - Standard Terminology Relating to Refractorieshas been reapproved, available as C71-12(2018) developed by Committee C08.92, ASTM BOS Volume 15.01.


C76 - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe has been revised to C76-18a developed by Committee C13.02, ASTMBOS Volume 04.05.


C76M - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C76M-18a developed by Committee C13.02, ASTM BOS Volume 04.05.


C780 - Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry has been revised to C780-18a developed by Committee C12.02, ASTM BOS Volume 04.05.


D1403 - Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment has been revised to D1403-18 developed by Committee D02.G0.02, ASTM BOS Volume 05.01.


D2584 - Standard Test Method for Ignition Loss of Cured Reinforced Resins has been revised to D2584-18 developed by Committee D20.18, ASTM BOS Volume 08.01.


D4061 - Standard Test Method for Retroreflectance of Horizontal Coatings has been reapproved, available as D4061-13(2018) developed by Committee E12.10, ASTM BOS Volume 06.01.


D5744 - Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cellhas been revised to D5744-18 developed by Committee D34.01.04, ASTM BOS Volume 11.04.


E18 - Standard Test Methods for Rockwell Hardness of Metallic Materials has been revised to E18-18 developed by Committee E28.06, ASTM BOS Volume 03.01.


E2563 - Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method has been revised to E2563-18 developed by Committee E34.50, ASTM BOS Volume 11.03.


E2564 - Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method has been revised to E2564-18 developed by Committee E34.50, ASTMBOS Volume 11.03.


E3150 - Standard Guide for Forensic Audio Laboratory Setup and Maintenance is a new standard, now available. E3150-18 developed by Committee E30.12, ASTM BOS Volume 14.02.


E783 - Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors has been reapproved, available as E783-02(2018) developed by Committee E06.51, ASTM BOS Volume 04.11.


F1066 - Standard Specification for Vinyl Composition Floor Tile has been reapproved, available as F1066-04(2018) developed by Committee F06.80, ASTM BOS Volume 15.04.


F137 - Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatushas been reapproved, available as F137-08(2018) developed by Committee F06.20, ASTM BOS Volume 15.04.


F150 - Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooringhas been reapproved, available as F150-06(2018) developed by Committee F06.20, ASTM BOS Volume 15.04.


F1667 - Standard Specification for Driven Fasteners: Nails, Spikes, and Staples has been revised to F1667-18 developed by Committee F16.05, ASTM BOS Volume 01.09.


F1701 - Standard Specification for Unused Rope with Special Electrical Properties has been reapproved, available as F1701-12(2018) developed by Committee F18.35, ASTM BOS Volume 10.03.


F2103 - Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications has been revised to F2103-18 developed by Committee F04.42, ASTM BOS Volume 13.01.


F2260 - Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy has been revised to F2260-18 developed by Committee F04.42, ASTM BOS Volume 13.01.


F2602 - Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) has been revised to F2602-18 developed by Committee F04.42, ASTM BOS Volume 13.02.


F3009 - Standard Specification for Polyolefin Composition Floor Tile has been reapproved, available as F3009-14(2018) developed by Committee F06.80, ASTM BOS Volume 15.04.


F682 - Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings has been reapproved, available as F682-82a(2018) developed by Committee F25.11, ASTM BOS Volume 01.07.


New ASTM Work Items

WK65303 - Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge is a work item revision to existing standard D6836-16


WK65304 -Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Integral Suspension Pressure Method) Analysis


WK65305 - Standard Terminology Relating to Dimension Stone is a work item revision to existing standard C119-16


WK65306 - Standard Terminology Relating to Dimension Stone is a work item revision to existing standard C119-16


WK65307 - Standard Terminology Relating to Dimension Stone is a work item revision to existing standard C119-16


WK65308 - Standard Specification for Diesel Fuel Oilsis a work item revision to existing standard D975-18


WK65310 - Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices is a work item revision to existing standard F1980-16


WK65311 - Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems is a work item revision to existing standard E2396/E2396M-15


WK65312 - Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems is a work item revision to existing standard E2397/E2397M-15


WK65313 - Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems is a work item revision to existing standard E2397/E2397M-15


WK65314 - Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems is a work item revision to existing standard E2398/E2398M-15a


WK65315 - Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems is a work item revision to existing standard E2399/E2399M-15


WK65316 - Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20) is a work item revision to existing standard D7467-18


WK65317 - is a work item for the reinstatement of the withdrawn standard F2311-08


WK65318 - Standard Specification for Nitration Grade Xylene is a work item revision to existing standard D843-18


WK65319 - Standard Specification for Nitration Grade Xylene is a work item revision to existing standard D843-18


WK65320 - Standard Specification for High Purity p-Xylene is a work item revision to existing standard D5136-17a


WK65321 - Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments is a work item revision to existing standard B928/B928M-15


WK65322 - Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations is a work item revision to existing standard C1479-16


WK65323 - Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces is a work item revision to existing standard F1805-16


WK65324 - Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products is a work item revision to existing standard D452/D452M-91(2013)e1


WK65325 - Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products is a work item revision to existing standard D452/D452M-91(2013)e1


WK65326 - Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs is a work item revision to existing standard F1209-14


WK65327 - Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies is a work item revision to existing standard F1210-14


WK65328 - Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks is a work item revision to existing standard F1231-14


WK65329 - Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules is a work item revision to existing standard D3462/D3462M-16


WK65330 - Standard Guide for Thermal Neutron Radiography of Materials is a work item revision to existing standard E748-16


WK65331 - Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction is a work item revision to existing standard D1752-04a(2013)


WK65332 -Test Method for Standard Test Method for Visual Inspection of Sterile Barrier Systems For Seal Integrity Using AuraSeal(TM) technology.


WK65333 - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) is a work item revision to existing standard C216-17a


WK65334 - Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) is a work item revision to existing standard C652-17a


WK65335 - Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals is a work item revision to existing standard D6249-06(2011)


WK65336 - Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization is a work item revision to existing standard C593-06(2011)


WK65337 - Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses is a work item revision to existing standard C911-06(2011)


WK65338 - Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Usesis a work item revision to existing standard C1529-06a(2011)


WK65339 - Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water is a work item revision to existing standard D4785-08(2013)e1


WK65340 - Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water is a work item revision to existing standard D4785-08(2013)e1


WK65341 - Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems is a work item revision to existing standard D2846/D2846M-17be1

ASTM D4848 - Standard Terminology Related to Force, Deformation and Related Properties of Textiles has been reapproved, available as D4848-98(2018) developed by Committee D13.58, ASTM BOS Volume 07.02.

ASTM D5599 - Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection has been revised to D5599-18 developed by Committee D02.04.0L, ASTM BOS Volume 05.02.

ASTM D5992 - Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods has been reapproved, available as D5992-96(2018) developed by Committee D11.10, ASTM BOS Volume 09.01.

ASTM D6799 - Standard Terminology Relating to Inflatable Restraints has been editorially changed, available as D6799-13e1 developed by Committee D13.20, ASTM BOS Volume 07.02.

ASTM E1327 - Standard Test Method for Evaluation of Antimicrobial Handwash Formulations by Utilizing Fingernail Regions has been reapproved, available as E1327-07(2018) developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM E2334 - Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample has been reapproved, available as E2334-09(2018) developed by Committee E11.30, ASTM BOS Volume 14.05.

ASTM E618 - Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine has been reapproved, available as E618-07(2018) developed by Committee A01.15, ASTM BOS Volume 01.05.

ASTM F2413 - Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear has been revised to F2413-18 developed by Committee F13.30, ASTM BOS Volume 15.07.

ASTM F2729 - Standard&

Cùng chuyên mục